Danh mục

How to Maintain and Troubleshoot NG-19RS Automatic Mattress Fold Rolling Machine for Maximum Uptime |NAIGU

Discover expert maintenance tips and troubleshooting steps for the NG-19RS Automatic Mattress Fold Rolling Machine to ensure smooth, uninterrupted production.
Jul 25th,2025 73 Lượt xem

The NG-19RS Automatic Mattress Fold Rolling Machine is designed for high-efficiency mattress packing, combining folding, compressing, and roll-packing into a single streamlined process. To ensure maximum uptime and reduce unexpected breakdowns, factory operators must follow a structured maintenance routine and understand basic troubleshooting techniques.

In this guide, we outline the best practices to keep your NG-19RS operating smoothly and productively.


Daily & Weekly Maintenance Checklist

Daily Maintenance

  • Clean machine surfaces: Remove dust, foam particles, and mattress fibers from folding arms, rollers, and conveyors.

  • Check pneumatic pressure: Ensure air supply is stable and within the recommended range (typically 0.6–0.8MPa).

  • Inspect safety sensors: Test emergency stops and photoelectric sensors for proper function.

Weekly Maintenance

  • Lubricate moving parts: Apply industrial grease to bearings, sliding rails, and chain drives.

  • Check belt and chain tension: Adjust if any loosening is detected.

  • Tighten bolts and screws: Especially around the folding mechanism and compression frame.


Common Troubleshooting Tips for NG-19RS

Even with regular maintenance, minor issues can arise during production. Below are the most common faults and how to handle them:

1. Mattress Not Centered or Misaligned After Folding

Cause: Misadjusted conveyor or sensor displacement
Solution: Reset conveyor alignment and recalibrate edge sensors via the HMI.

2. Folding Arms Not Returning to Start Position

Cause: Air cylinder delay or limit switch malfunction
Solution: Check the solenoid valve and clean or replace the limit switch.

3. Roll Pack Is Too Loose or Too Tight

Cause: Incorrect roller pressure or speed setting
Solution: Adjust roller speed and pressure in the control panel settings.

4. PLC Touchscreen Freezes or Displays Error

Cause: Power fluctuation or HMI software crash
Solution: Restart the HMI; if unresolved, check the power supply and cable connections.


Spare Parts to Keep On Hand

To reduce downtime during repairs, keep the following NG-19RS spare parts in stock:

  • Photoelectric sensors

  • Pneumatic valves and seals

  • Roller belts

  • PLC touchscreen module

  • Air filter regulator


When to Contact NAIGU Support

If your team cannot resolve the issue quickly, NAIGU provides:

  • Remote video diagnosis

  • Spare parts delivery within 48 hours internationally

  • On-site engineer service upon request (available in select countries)

Keep a record of:

  • Machine serial number

  • Error code or fault history

  • Maintenance log

This will speed up support response and troubleshooting accuracy.


Pro Tips for Long-Term Performance

  • Train operators regularly using official NAIGU training manuals and videos.

  • Avoid overloading mattresses beyond the machine’s designed size/thickness range.

  • Perform monthly software backups of the PLC settings.


Conclusion

The NG-19RS Automatic Mattress Fold Rolling Machine is built for speed and precision, but like any industrial machine, it requires regular care. With a proactive maintenance schedule and a clear troubleshooting protocol, your factory can minimize downtime, extend equipment life, and maintain consistent output quality.

📞 Need expert help?

Contact NAIGU for technical support, spare parts, or remote assistance today.

📧 Email: jenney@gdnaimei.com
📱 WhatsApp/Phone: +86 13924835577
🌐 Website: https://naigumattressmachine.com

Need Help Choosing the Right Machine ?
Full Name :
Your Email : *
Phone or WhatsApp:
Message: *
Company Name